LoadMaxx Tractor Scale Kit
| Description: | Price: |
| Single leveling valve | 950.00 |
| Dual leveling valves | 1,125.00 |
LoadMaxx works on tractors with air drive suspensions and most trucks with leaf spring steer axles and air suspension drive axles. Air pressure sensors measure pressure in the air springs, and deflection sensors measure flex for axles with leaf spring suspensions. The scale converts the sensor measurements into accurate on-the-ground weights. Properly calibrated and used, LoadMaxx is accurate to within 300 lbs on each axle group.
LoadMaxx Trailer Scale Kit
| Description: | Price: |
| Nose mount – all types | 895.00 |
| Side mount – refers and vans | 820.00 |
| Side mount – flatbeds and bulk | 815.00 |
| Rear mount – bulk | 795.00 |
| Inside frame rail mount - lowbed | 790.00 |
| Mounting bracket – flatbeds, lowboys | 51.70 |
| Mounting bracket – all others | 38.10 |
The LoadMaxx Trailer Scale works on air-ride equipped trailers with single or dual leveling valves. It converts pressure in the air springs into a very accurate on-the-ground weight. The heavier the load, the more air pressure is required to maintain ride-height. Once calibrated, the trailer scale displays the axle group weight to within 300 lbs of a certified scale.
LoadMaxx Truck Scale Kit
| Description: | Price: |
| Single leveling valve | 1,925.00 |
| Dual leveling valves | 2,050.00 |
LoadMaxx works on trucks with walking beam, Mack Camelback, and other mechanical drive suspensions as well as vehicles with air drive suspensions. Deflection sensors measure flex in the mechanical drive or steer suspension and air pressure sensors measure pressure in the air springs. The scale converts the sensor measurements into accurate on-the-ground weights. Properly calibrated and used, LoadMaxx is accurate to within 300 lbs on each axle group.
QuickLoad Tractor & Straight Trucks
| Description: | Price: |
| Display Kit | 340.00 |
| Sensor Kit | 130.00 |
QuickLoad is designed as a cost-effective on-board weighing solution for dedicated tractor trailer fleets and straight trucks with either air or leaf spring suspensions. For little more than the cost of a set of air gauges, QuickLoad provides accurate weights on an easy-to-read in-dash display. QuickLoad is ideal for owner operators and small fleets, because it is inexpensive, easy to install and use. The QuickLoad Scale accurately measures and displays steer and drive axle group weights, GVW and net payload weights. Weight readings are conveniently displayed in pounds or kilograms and are accurate at all vehicle operating temperatures, humidity levels and altitudes. Warning and overweight alarms are standard from two separate outputs. Installation consists of adding the display to the dash and connecting a power cable, sensors and sensor cables.
QuickLoad Trailer Scale
| Description: | Price: |
| Nose mount – all types | 525.00 |
| Side mount – reefers and vans | 495.00 |
| Side mount – flatbeds and bulk trailers | 485.00 |
| Rear mount – bulk trailers | 485.00 |
| Inside frame rail mount – lowbed | 485.00 |
| Mounting bracket – flatbeds, lowboys | 50.00 |
| Mounting bracket – all others | 43.00 |
Put an end to the guesswork. Air-Weigh’s QuickLoad Trailer Scale provides on-the-ground weights right at the loading site to let you load quickly and stay within safe, legal limits. QuickLoad has all the precision you have come to expect from Air-Weigh, but is designed for applications that don’t require trailer weights in the cab. It’s an economical approach to trailer weighing that doesn’t skimp on premium features. It’s hard enough to make a profit without the added hassles of check-weigh fees, out-of-route miles, overweight fines and wasted time reworking loads. With a touch screen display and built-in warning and overweight alarm LEDs, the driver- friendly QuickLoad Trailer Scale is simple to use and always reliable. Easy to install, the standalone QuickLoad Trailer Scale includes factory calibration for many popular suspension type.